工具 66 / 136

Corrugated Sheet Weight Calculator — US Units

Corrugated Sheet Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual board gsm (g/m²) ready before you start.

您的规格参数

g/m²
件
修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

每张重量

1.06 lb/sheet
板材总重量1,058.22 lb
每张面积10.33 ft²

使用纸板实际克重。楞型、ECT和BCT不能确定定量。

Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436

Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual board GSM: 500 g/m²; Sheet quantity: 1000 units → 1.06 lb/sheet

根据您输入的数据计算。请与供应商确认规格。

公式解释。

Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436

The result answers a specific purchasing question: Work out corrugated sheet weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read weight per sheet in lb/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Sheet width (inch); Sheet length (inch); Actual board GSM (g/m²); Sheet quantity (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review weight per sheet and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual board gsm 500.00 g/m², sheet quantity 1,000.00 units. The calculated weight per sheet is 1.06 lb/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

纸板宽度
47.2440945 inch
纸板长度
31.496063 inch
纸板实际克重
500 g/m²
纸板张数
1,000 件
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436
每张重量1.06 lb/sheet

常见问题

Which units should I use for corrugated sheet weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated sheet weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual board gsm (g/m²), sheet quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗