工具 11 / 136

Flexible Packaging Quote Comparison Calculator — US Units

Flexible Packaging Quote Comparison connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

将报价统一到同一基准。

如有供应商实际克重,请输入。未知尺寸留空;比较结果会指出哪些换算需要更多信息。

QUOTATION A
几何尺寸与规格
订单与额外费用
QUOTATION B
几何尺寸与规格
订单与额外费用

需求与规格容差

年度支出按足够覆盖共同需求的整批采购计算。每批计运费,首年仅计一次模具费。包含多余库存。最低起订量仅为下限约束,不是默认发货批量。不含工艺损耗、关税、税费、付款条款或库存持有成本。

编辑规格容差

绝对容差比较输入的最高值和最低值。道数必须完全相同。结构检查仅忽略大小写和重复空格,不判断材料等效性。

最低计算成本≠规格等效

输入字段在您的容差范围内一致,但不能证明规格等效;阻隔、热封、机械性能及批准资质仍需审核。

按供应商显示材料和首批到货成本。高亮值为该行最低计算成本。
比较基准Supplier AUSDSupplier BUSD
报价基础lbft²
报价US$1.4515/lbUS$0.02127/ft²
结构PET12 / PE60+2 g/m²胶黏剂PET12 / PE60+2 g/m²胶黏剂
克重73.88 g/m²73.88 g/m²
总厚度2.83 mil2.83 mil
幅宽31.50 inch31.50 inch
重复长度/道数9.84 inch / 29.84 inch / 2
最小起订量1,102.31 lb1,102.31 lb
每次供货数量2,204.62 lb2,204.62 lb
运费/批次US$250.00US$350.00
一次性模具费用US$600.00US$900.00
Material cost / lbUS$1.4515/lbUS$1.4060/lb最低计算成本
Material cost / ft²US$0.02196/ft²US$0.02127/ft²最低计算成本
Material cost / linear footUS$0.05765/ftUS$0.05584/ft最低计算成本
材料成本/1,000件US$23.64US$22.90最低计算成本
First-shipment landed / lbUS$1.8370/lb最低计算成本US$1.9730/lb
First-shipment landed / ft²US$0.02780/ft²最低计算成本US$0.02985/ft²
批次材料小计US$3,200.00US$3,099.62
首批到货总成本US$4,050.00US$4,349.62
首年年度支出US$28,200.00US$28,496.97
每年整批发货次数88
Annual purchased 1,000 units1,082.841,082.84

首批到货成本包含全部输入模具费,年度支出仅计一次。每1,000件价格按输入重复长度和道数计算理论数量,不加损耗余量。较低成本本身不能证明供应商适合。

公式及代入值

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Supplier A

Area price: US$0.02196/ft²

Weight price: US$1.4515/lb

Running-foot price: US$0.05765/ft

Width: 31.50 inch; Repeat: 9.84 inch

Supplier B

Area price: US$0.02127/ft²

Weight price: US$1.4060/lb

Running-foot price: US$0.05584/ft

Width: 31.50 inch; Repeat: 9.84 inch

公式解释。

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Build flexible packaging quote comparison from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

如何使用此计算器

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

可以核验的计算

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

Supplier A offers 25,000 ft² at $0.015/ft² with $80 freight. Supplier B offers the same qualified coverage at $0.0145/ft² with $100 freight.

Supplier A delivered
US$455.00
Supplier B delivered
US$462.50
A: 25,000 × $0.015 + $80 = $455; B: 25,000 × $0.0145 + $100 = $462.50
Difference for this purchaseUS$7.5000

Both suppliers must meet the same specification. No currency conversion, tax treatment or supplier qualification is implied.

常见问题

Which units should I use for flexible packaging quote comparison?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two flexible packaging quote comparison results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗