工具 13 / 136

Packaging Cost per Unit Calculator — US Units

Packaging Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

您的规格参数

lanes
g/m²

如有供应商提供的实际克重或实测克重,请优先使用。

USD/lb

仅标示货币,不进行汇率换算。

%

占总投入量的损耗百分比。

修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

每个合格包装的材料成本

US$0.02526/pack
每1,000个合格包装的材料成本US$25.26/1,000 packs
每件理论面积1.08 ft²/pack
每个合格品的毛面积1.13 ft²/pack
Film cost per ft²US$0.02230/ft²

损耗率是损失材料占总投入材料的百分比。毛需求量=净需求量÷(1-损耗率)。

仅含材料成本;不含模具、运费、加工人工及配件。

Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²

Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process waste: 5 % → US$0.02526/pack

根据您输入的数据计算。请与供应商确认规格。

公式解释。

Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²

The result answers a specific purchasing question: Work out packaging cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read material cost per good pack in your selected currency/pack. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Film GSM (g/m²); Film price on selected basis (currency/lb); Process waste (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review material cost per good pack and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated material cost per good pack is US$0.02526/pack. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

幅宽
31.496063 inch
印刷/包装节距
9.84251969 inch
幅宽方向的列数
2 lanes
薄膜克重
80 g/m²
所选基础的薄膜价格
1.36077711 USD/lb
工艺损耗
5 %
Cost/good unit = Width(in) × Repeat(in) ÷ 144 ÷ Lanes ÷ (1 − Waste fraction) × Price/ft²
每个合格包装的材料成本US$0.02526/pack

常见问题

Which units should I use for packaging cost per unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packaging cost per unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗