工具 53 / 136

Packs per Roll Calculator — US Units

Packs per Roll connects the figures on a US supplier quote with the quantity used by your packaging operation. Have roll length (ft), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

您的规格参数

lanes
%

占总投入量的损耗百分比。

修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

预计合格包装数量

7,600.00 包
损耗前理论包装数量8,000.00 包
合格整包装数,向下取整7,600.00 包
Nominal packs per foot2.44 包/ft

预计产出为估算值;实际完整包装数还取决于开机损耗及重复图案的套准。

Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)

Roll length: 3280.839895013123 ft; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Process waste: 5 % → 7,600.00 包

根据您输入的数据计算。请与供应商确认规格。

公式解释。

Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)

The result answers a specific purchasing question: Work out packs per roll with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read expected good packs in packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Roll length (ft); Print / pack repeat (inch); Lanes across the web (lanes); Process waste (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review expected good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter roll length 3,280.84 ft, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, process waste 5.00 %. The calculated expected good packs is 7,600.00 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

卷材长度
3,280.8399 ft
印刷/包装节距
9.84251969 inch
幅宽方向的列数
2 lanes
工艺损耗
5 %
Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)
预计合格包装数量7,600.00 包

常见问题

Which units should I use for packs per roll?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packs per roll results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record roll length (ft), print / pack repeat (inch), lanes across the web (lanes), process waste (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗