Protective Insert Cost per Shipped Unit Calculator — US Units
Protective Insert Cost per Shipped Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
计算防护套件价格。
Use quantities per 发货单位. A component shared by 12 products uses a quantity of 1 ÷ 12 (0.083333…). Enter a fractional allocation for shippers or pallets; do not include their whole price for every product.
货币选项仅改变显示单位,不进行汇率换算。
- 组件×数量
- US$0.3350
- Tooling allocation / 发货单位
- US$0.00000
- Freight allocation / 发货单位
- US$0.00000
- 每1,000件发货产品成本
- US$335.00
- 年度包装支出
- US$33,500.00
| 组件 | 数量 | Cost / 发货单位 | 占总额比例 |
|---|---|---|---|
| 泡沫端部内衬 | 2.00 | US$0.1800 | 53.73% |
| 蜂窝垫 | 1.00 | US$0.06000 | 17.91% |
| 护角 | 4.00 | US$0.08000 | 23.88% |
| 纸质缓冲填料分摊 | 1.00 | US$0.01500 | 4.48% |
| 合计 | — | US$0.3350 | 100.00% |
Annual spend = annual finished units × total cost per 发货单位. It includes the entered per-unit tooling and freight allocations. No waste, filling cost, tax, storage or transport beyond those allocations is inferred. 组件价格不能证明防护、堆叠或跌落测试性能。
公式及代入值
行成本=每件成品的数量×单件价格+模具费分摊+运费分摊。
每件成品总成本=所有行成本之和。组件占比=行成本÷总成本×100。
泡沫端部内衬: 2.00 × US$0.09000 + US$0.00000 + US$0.00000 = US$0.1800
蜂窝垫: 1.00 × US$0.06000 + US$0.00000 + US$0.00000 = US$0.06000
护角: 4.00 × US$0.02000 + US$0.00000 + US$0.00000 = US$0.08000
纸质缓冲填料分摊: 1.00 × US$0.01500 + US$0.00000 + US$0.00000 = US$0.01500
合计: 0.1800 + 0.06000 + 0.08000 + 0.01500 = US$0.3350 / 发货单位
每1,000件: 0.3350 × 1,000 = US$335.00
年度: 100,000.00 × 0.3350 = US$33,500.00
公式解释。
Build protective insert cost per shipped unit from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
如何使用此计算器
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
可以核验的计算
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
An illustrative finished pack uses one $0.21 bottle, one $0.14 closure and one $0.03 label. Quantities here are finished pieces, so changing measurement system does not alter them.
$0.21 + $0.14 + $0.03 = $0.38/pack; 100,000 × $0.38 = $38,000Add separately supplied inserts or protection for a protective-kit calculation. Freight, tooling and process loss are excluded from this simple example.
常见问题
Which units should I use for protective insert cost per shipped unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two protective insert cost per shipped unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
使用结果前,请核对显示的公式、单位和假设。
方法、单位和材料假设 ↗