工具 39 / 136

Roll Area Calculator — US Units

Roll Area connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), roll length (ft), film gsm (g/m²) ready before you start.

您的规格参数

g/m²

如有供应商提供的实际克重或实测克重,请优先使用。

修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

卷内薄膜面积

8,611.13 ft²
薄膜净重141.10 lb

Area(ft²) = Width(in) ÷ 12 × Length(ft)

Web width: 31.496062992125985 inch; Roll length: 3280.839895013123 ft; Film GSM: 80 g/m² → 8,611.13 ft²

根据您输入的数据计算。请与供应商确认规格。

公式解释。

Area(ft²) = Width(in) ÷ 12 × Length(ft)

The result answers a specific purchasing question: Work out roll area with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read roll film area in ft². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Web width (inch); Roll length (ft); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review roll film area and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter web width 31.50 inch, roll length 3,280.84 ft, film gsm 80.00 g/m². The calculated roll film area is 8,611.13 ft². The table lists the remaining inputs and results so the scenario can be checked or reproduced.

幅宽
31.496063 inch
卷材长度
3,280.8399 ft
薄膜克重
80 g/m²
Area(ft²) = Width(in) ÷ 12 × Length(ft)
卷内薄膜面积8,611.13 ft²

常见问题

Which units should I use for roll area?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two roll area results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), roll length (ft), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗