Connect FIBC cubic feet, fill pounds and bags per batch

Use internal dimensions, subtract stated headspace and multiply usable cubic feet by measured settled bulk density in lb/ft³. Use the approved planned fill for ordering bags.

发布者 Nalyquo · ·

示例计算;不宣称经过独立专家审核。本次更新增加发布和方法信息。

方法和参考范围编辑政策与更正

Set up the US purchasing comparison

Use internal dimensions, subtract stated headspace and multiply usable cubic feet by measured settled bulk density in lb/ft³. Use the approved planned fill for ordering bags.

Formula and worked US example

Volume(ft³) = L(in) × W(in) × H(in) ÷ 1,728; Bags = ceil(Batch lb ÷ Approved planned lb/bag)

A 36 × 36 × 48-inch envelope is 36 ft³. With 10% headspace, 32.4 ft³ remains. At an illustrative 40 lb/ft³, geometric fill is 1,296 lb before any lower approved limit. A 12,000-lb batch needs ten bags at a qualified planned 1,200 lb each.

Checks before using the estimate

Geometric fill is not a safe working load approval. Use the lower qualified planned payload and add spare bags explicitly.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

常见问题

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Geometric fill is not a safe working load approval. Use the lower qualified planned payload and add spare bags explicitly.