ツール 52 / 136

Adhesive Cost per ft² Calculator — US Units

Adhesive Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Have dry adhesive coat weight (g/m²), adhesive solids (%), wet adhesive price per lb (currency/lb) ready before you start.

仕様を入力

g/m²
%
USD/lb

通貨の表示のみ。為替換算は行いません。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

Adhesive material cost per ft²

US$0.00186/ft²
湿潤塗布量5.00 g/m²

価格は入力した固形分と同じ基準の、実際に使用する湿潤接着剤の価格にしてください。損失や塗布費用は含みません。

Cost/ft² = Dry GSM × 0.0002048161436 ÷ Solids fraction × Wet adhesive price/lb

Dry adhesive coat weight: 2 g/m²; Adhesive solids: 40 %; Wet adhesive price per kg: 1.81436948 USD/lb → US$0.00186/ft²

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Cost/ft² = Dry GSM × 0.0002048161436 ÷ Solids fraction × Wet adhesive price/lb

The result answers a specific purchasing question: Work out adhesive cost per ft² with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read adhesive material cost per ft² in your selected currency/ft². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Dry adhesive coat weight (g/m²); Adhesive solids (%); Wet adhesive price per lb (currency/lb). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review adhesive material cost per ft² and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter dry adhesive coat weight 2.00 g/m², adhesive solids 40.00 %, wet adhesive price per lb US$1.8144/lb. The calculated adhesive material cost per ft² is US$0.00186/ft². The table lists the remaining inputs and results so the scenario can be checked or reproduced.

接着剤の乾燥塗布量
2 g/m²
接着剤固形分率
40 %
Wet adhesive price per lb
1.81436948 USD/lb
Cost/ft² = Dry GSM × 0.0002048161436 ÷ Solids fraction × Wet adhesive price/lb
Adhesive material cost per ft²US$0.00186/ft²

よくある質問

Which units should I use for adhesive cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two adhesive cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record dry adhesive coat weight (g/m²), adhesive solids (%), wet adhesive price per lb (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗