ツール 50 / 136

Laminate Cost per ft² Calculator — US Units

Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

層ごとに構成を作成。

例を読み込む

代表的な密度です。実際の密度は樹脂グレードや配合によって異なります。入手できる場合は仕入先データや実測値を使用してください。 実測坪量や仕入先坪量は通常、密度からの推定より信頼できます。カスタム材には検証済み密度を入力し、紙の坪量を一般密度で推定しないでください。

FILM LAYER 01
16.68g/m²

Estimated using typical PET / BOPET density of 1.39 g/cm³.

FILM LAYER 02
55.20g/m²

Estimated using typical PE(一般) density of 0.9200 g/cm³.

接着剤・印刷・コーティング

除外する添加材は0にしてください。坪量入力はすべて1m²当たりの残留乾燥質量です。 接着剤価格は納入湿潤品の価格で、固形分率から乾燥塗布量を湿潤消費量へ換算します。インク、コーティング等は残留乾燥kg単価です。加工ロス、エネルギー、労務、運賃は含みません。

Adhesive interface 1

残留乾燥塗布量

インク

残留乾燥質量

コーティング

残留乾燥質量

その他の残留材料

残留乾燥質量

材料原価合計US$0.1657/ m²
フィルム層
71.88 g/m²
接着剤・インク・コーティング・その他
2.00 g/m²
ラミネート総坪量
73.88 g/m²
ラミネート歩留まり面積
66.09 ft²/lb
フィルム厚さのみ
2.83 mil
1,000m²当たりの重量
162.88 lb
各層・添加材の質量と材料原価への寄与
層・添加材乾燥坪量USD/m²
1. PET / BOPET16.680.05838
2. PE(一般)55.200.09936
Adhesive interface 12.000.00800
インク ・対象外0.000.00000
コーティング ・対象外0.000.00000
その他の残留材料 ・対象外0.000.00000
合計73.880.1657

フィルム厚さは接着剤、インク、コーティングを除きます。歩留まり面積は工程ロス控除前の理論値です。 材料ライブラリの代表密度を含む推定です。

式と代入値

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²; US$1.5876/lb → US$0.00542/ft²

PE(一般): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²; US$0.8165/lb → US$0.00923/ft²

Total retained basis weight: 73.88 g/m²

Yield: 4,882.427636 ÷ 73.88 = 66.09 ft²/lb

Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.

Adhesive interface 1: US$0.00074/ft²

材料原価合計: US$0.01540/ft²

計算式をわかりやすく。

Material cost/ft² = Σ(Layer GSM × 0.0002048161436 × Layer price/lb) + Added material cost/ft²

Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

この計算ツールの使い方

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

検算できる計算例

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
43.02 g/m²
Coverage yield
113.49 ft²/lb
Material cost
US$0.01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

よくある質問

Which units should I use for laminate cost per ft²?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two laminate cost per ft² results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗