ツール 109 / 136

Closure Cost per 1,000 Calculator — US Units

Closure Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted closure / dispenser price (currency/unit), order quantity (units), freight for this order (currency) ready before you start.

仕様を入力

USD/unit
個
USD
USD

単位表示のみです。為替換算は行いません。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

キャップ1,000個当たりの原価

US$125.00/1,000 closures
キャップ合計原価US$0.1250/closures
1,000個当たりの見積部品・追加費US$100.00/1,000 units
1,000個当たりの運賃配賦額US$25.00/1,000 units
1,000個当たりの金型・版代配賦額US$0.00000/1,000 units
入力した配賦額を含む注文合計US$1,250.00

印刷、装飾、仕上げ、部品は基本見積りに含まれていない場合のみ別途入力してください。

金型・版代はこの注文への配賦額です。複数注文に使用する場合は生涯数量で償却してください。

クロージャー1,000個の費用 = 1,000 ×(単価 + 1個の費用配賦)

Quoted closure / dispenser price: 0.1 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD → US$125.00/1,000 closures

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

クロージャー1,000個の費用 = 1,000 ×(単価 + 1個の費用配賦)

The result answers a specific purchasing question: Work out closure cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 closures in your selected currency/1,000 closures. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Quoted closure / dispenser price (currency/unit); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per 1,000 closures and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter quoted closure / dispenser price US$0.1000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per 1,000 closures is US$125.00/1,000 closures. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

キャップ・ディスペンサーの見積価格
0.1 USD/個
発注数量
10,000 個
この注文の運賃
250 USD
この注文に配賦する金型費
0 USD
Cost/1,000 closures = 1,000 × (Closure price + Allocated charges/unit)
キャップ1,000個当たりの原価US$125.00/1,000 closures

よくある質問

Which units should I use for closure cost per 1,000?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two closure cost per 1,000 results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted closure / dispenser price (currency/unit), order quantity (units), freight for this order (currency), tooling allocated to this order (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗