ツール 31 / 136

Film Density from GSM and Thickness Calculator — US Units

Film Density from GSM and Thickness connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), film thickness (mil) ready before you start.

仕様を入力

g/m²

仕入先の実際の坪量または実測値がある場合は、それを使用してください。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

フィルムの見掛け密度

1.39 g/cm³

多層構造では実効平均値となり、個々の樹脂グレードを特定するものではありません。

厚さの測定誤差は算出密度に直接影響します。

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

Film GSM: 16.68 g/m²; Film thickness: 0.47244094488188976 mil → 1.39 g/cm³

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

The result answers a specific purchasing question: Work out film density from gsm and thickness with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read apparent film density in g/cm³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Film GSM (g/m²); Film thickness (mil). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review apparent film density and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter film gsm 16.68 g/m², film thickness 0.4724 mil. The calculated apparent film density is 1.39 g/cm³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

フィルム坪量
16.68 g/m²
フィルム厚さ
0.472440945 ミル
Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)
フィルムの見掛け密度1.39 g/cm³

よくある質問

Which units should I use for film density from gsm and thickness?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film density from gsm and thickness results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗