ツール 04 / 136

Film Price per linear foot to lb Calculator — US Units

Film Price per linear foot to lb connects the figures on a US supplier quote with the quantity used by your packaging operation. Have price per linear foot (currency/ft), web width (inch), film gsm (g/m²) ready before you start.

仕様を入力

USD/ft

通貨の表示のみ。為替換算は行いません。

g/m²

仕入先の実際の坪量または実測値がある場合は、それを使用してください。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

Equivalent price per lb

US$1.3608/lb
Equivalent price per ft²US$0.02230/ft²
Film weight per foot0.0430 lb/ft

Price/ft² = Price/linear ft ÷ (Width(in) ÷ 12); Price/lb = Price/ft² ÷ (GSM × 0.0002048161436)

Price per linear meter: 0.05852160000000001 USD/ft; Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → US$1.3608/lb

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Price/ft² = Price/linear ft ÷ (Width(in) ÷ 12); Price/lb = Price/ft² ÷ (GSM × 0.0002048161436)

The result answers a specific purchasing question: Work out film price per linear foot to lb with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read equivalent price per lb in your selected currency/lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Price per linear foot (currency/ft); Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review equivalent price per lb and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter price per linear foot US$0.05852/ft, web width 31.50 inch, film gsm 80.00 g/m². The calculated equivalent price per lb is US$1.3608/lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Price per linear foot
0.0585216 USD/ft
ウェブ幅
31.496063 inch
フィルム坪量
80 g/m²
Price/ft² = Price/linear ft ÷ (Width(in) ÷ 12); Price/lb = Price/ft² ÷ (GSM × 0.0002048161436)
Equivalent price per lbUS$1.3608/lb

よくある質問

Which units should I use for film price per linear foot to lb?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film price per linear foot to lb results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record price per linear foot (currency/ft), web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗