lb per 1,000 Packs Calculator — US Units
lb per 1,000 Packs connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.
仕様を入力
仕入先の実際の坪量または実測値がある場合は、それを使用してください。
総投入量に対する損失率です。
良品包装1,000個当たりの総フィルム使用量
ロス率は総材料投入量に対する損失の割合です。総必要量=正味必要量÷(1-ロス率)で求めます。
包装1個当たりのグラム数と1,000個当たりの正味キログラム数は、グラムからキログラムへの換算と1,000個の係数が相殺されるため、数値が一致します。
Net lb/1,000 packs = Area/pack(ft²) × GSM × 0.2048161436; Gross lb = Net lb ÷ (1 − Waste fraction)
Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m²; Process waste: 5 % → 18.57 lb/1,000 packs入力値に基づく計算です。仕様は仕入先に確認してください。
計算式をわかりやすく。
The result answers a specific purchasing question: Work out lb per 1,000 packs with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read gross film per 1,000 good packs in lb/1,000 packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
この計算ツールの使い方
- 01
Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Film GSM (g/m²); Process waste (%). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review gross film per 1,000 good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
検算できる計算例
For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated gross film per 1,000 good packs is 18.57 lb/1,000 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- ウェブ幅
- 31.496063 inch
- 印刷・包装のリピート長
- 9.84251969 inch
- 幅方向の列数
- 2 lanes
- フィルム坪量
- 80 g/m²
- 工程ロス
- 5 %
Net lb/1,000 packs = Area/pack(ft²) × GSM × 0.2048161436; Gross lb = Net lb ÷ (1 − Waste fraction)よくある質問
Which units should I use for lb per 1,000 packs?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two lb per 1,000 packs results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗