ツール 53 / 136

Packs per Roll Calculator — US Units

Packs per Roll connects the figures on a US supplier quote with the quantity used by your packaging operation. Have roll length (ft), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

仕様を入力

lanes
%

総投入量に対する損失率です。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

想定良品包装数

7,600.00 包装
ロス控除前の理論包装数8,000.00 包装
切り捨て後の整数良品包装数7,600.00 包装
Nominal packs per foot2.44 包装/ft

想定歩留まりは推定値です。実際の完全な包装数は立上げロスやリピートの見当合わせにも左右されます。

Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)

Roll length: 3280.839895013123 ft; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Process waste: 5 % → 7,600.00 包装

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)

The result answers a specific purchasing question: Work out packs per roll with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read expected good packs in packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Roll length (ft); Print / pack repeat (inch); Lanes across the web (lanes); Process waste (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review expected good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter roll length 3,280.84 ft, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, process waste 5.00 %. The calculated expected good packs is 7,600.00 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

ロール長さ
3,280.8399 ft
印刷・包装のリピート長
9.84251969 inch
幅方向の列数
2 lanes
工程ロス
5 %
Good packs = Length(ft) × 12 ÷ Repeat(in) × Lanes × (1 − Waste fraction)
想定良品包装数7,600.00 包装

よくある質問

Which units should I use for packs per roll?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two packs per roll results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record roll length (ft), print / pack repeat (inch), lanes across the web (lanes), process waste (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗