Protective Insert Cost per Shipped Unit Calculator — US Units
Protective Insert Cost per Shipped Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
保護キットの原価を計算。
Use quantities per 出荷単位. A component shared by 12 products uses a quantity of 1 ÷ 12 (0.083333…). Enter a fractional allocation for shippers or pallets; do not include their whole price for every product.
通貨は表示単位のみを変更し、為替換算は行いません。
- 部品×数量
- US$0.3350
- Tooling allocation / 出荷単位
- US$0.00000
- Freight allocation / 出荷単位
- US$0.00000
- 出荷1,000個当たりの原価
- US$335.00
- 年間包装支出
- US$33,500.00
| 部品 | 数量 | Cost / 出荷単位 | 合計に占める割合 |
|---|---|---|---|
| 発泡エンドインサート | 2.00 | US$0.1800 | 53.73% |
| ハニカムパッド | 1.00 | US$0.06000 | 17.91% |
| エッジプロテクター | 4.00 | US$0.08000 | 23.88% |
| 紙緩衝材配賦額 | 1.00 | US$0.01500 | 4.48% |
| 合計 | — | US$0.3350 | 100.00% |
Annual spend = annual finished units × total cost per 出荷単位. It includes the entered per-unit tooling and freight allocations. No waste, filling cost, tax, storage or transport beyond those allocations is inferred. 部品原価では保護性、積み重ね性能、落下試験性能は立証できません。
式と代入値
行原価=完成品当たり数量×製品単価+金型費配賦額+運賃配賦額。
完成品当たり総原価=全行原価の合計。部品比率=行原価÷総原価×100。
発泡エンドインサート: 2.00 × US$0.09000 + US$0.00000 + US$0.00000 = US$0.1800
ハニカムパッド: 1.00 × US$0.06000 + US$0.00000 + US$0.00000 = US$0.06000
エッジプロテクター: 4.00 × US$0.02000 + US$0.00000 + US$0.00000 = US$0.08000
紙緩衝材配賦額: 1.00 × US$0.01500 + US$0.00000 + US$0.00000 = US$0.01500
合計: 0.1800 + 0.06000 + 0.08000 + 0.01500 = US$0.3350 / 出荷単位
1,000個当たり: 0.3350 × 1,000 = US$335.00
年間: 100,000.00 × 0.3350 = US$33,500.00
計算式をわかりやすく。
Build protective insert cost per shipped unit from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
この計算ツールの使い方
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
検算できる計算例
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
An illustrative finished pack uses one $0.21 bottle, one $0.14 closure and one $0.03 label. Quantities here are finished pieces, so changing measurement system does not alter them.
$0.21 + $0.14 + $0.03 = $0.38/pack; 100,000 × $0.38 = $38,000Add separately supplied inserts or protection for a protective-kit calculation. Freight, tooling and process loss are excluded from this simple example.
よくある質問
Which units should I use for protective insert cost per shipped unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two protective insert cost per shipped unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗