Thermoformed Tray Cost per 1,000 Calculator — US Units
Thermoformed Tray Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%) ready before you start.
仕様を入力
単位表示のみです。為替換算は行いません。
トレー1,000個当たりの原価
ロスは総投入量のうち失われる割合です。総必要量=良品出力÷(1-ロス百分率/100)。
スクラップ控除や社内粉砕材による相殺は自動で差し引きません。加工費は入力した額のみ含めます。
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb
Actual finished tray weight: 0.044092452436975516 lb; Resin price per kg: 0.6803885550000001 USD/lb; Process loss on gross input: 5 %; Conversion cost per good tray: 0.02 USD/unit; Good trays in shipment: 10000 units; Freight for this order: 250 USD → US$76.58/1,000 trays入力値に基づく計算です。仕様は仕入先に確認してください。
計算式をわかりやすく。
The result answers a specific purchasing question: Work out thermoformed tray cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 trays in your selected currency/1,000 trays. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
この計算ツールの使い方
- 01
Collect Actual finished tray weight (lb); Resin price per lb (currency/lb); Process loss on gross input (%); Conversion cost per good tray (currency/unit); Good trays in shipment (units); Freight for this order (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per 1,000 trays and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
検算できる計算例
For this US purchasing example, enter actual finished tray weight 0.0441 lb, resin price per lb US$0.6804/lb, process loss on gross input 5.00 %, conversion cost per good tray US$0.02000/unit. The calculated cost per 1,000 trays is US$76.58/1,000 trays. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 実際の完成トレー重量
- 0.0440924524 lb
- Resin price per lb
- 0.680388555 USD/lb
- 総投入量基準の工程ロス
- 5 %
- 良品トレーあたりの加工費
- 0.02 USD/個
- 出荷良品トレー数
- 10,000 個
- この注文の運賃
- 250 USD
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lbよくある質問
Which units should I use for thermoformed tray cost per 1,000?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two thermoformed tray cost per 1,000 results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%), conversion cost per good tray (currency/unit) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗