Cartons per Sheet Calculator — US Units
Cartons per Sheet connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual blank width (inch) ready before you start.
사양 입력
최적 단순 직사각형 배치
두 가지 균일한 직사각형 방향만 비교합니다. 간격, 물림 여백, 결 방향 제한 및 불규칙 칼선 중첩 배치는 제외합니다.
시트당 상자 수 = 내림(시트 너비 ÷ 블랭크 너비) × 내림(시트 길이 ÷ 블랭크 길이)
Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch → 4.00 blanks/sheet입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out cartons per sheet with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read best simple rectangular layout in blanks/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Sheet width (inch); Sheet length (inch); Actual blank width (inch); Actual blank length (inch). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review best simple rectangular layout and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual blank width 19.69 inch, actual blank length 15.75 inch. The calculated best simple rectangular layout is 4.00 blanks/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 시트 폭
- 47.2440945 inch
- 시트 길이
- 31.496063 inch
- 실제 전개도 폭
- 19.6850394 inch
- 실제 전개도 길이
- 15.7480315 inch
Cartons/sheet = floor(Sheet width ÷ Blank width) × floor(Sheet length ÷ Blank length)자주 묻는 질문
Which units should I use for cartons per sheet?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two cartons per sheet results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual blank width (inch), actual blank length (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗