Closure Landed Cost Calculator — US Units
Closure Landed Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units) ready before you start.
사양 입력
단위 표시만 하며 통화 변환은 하지 않습니다.
마개당 원가
견적 금액과 모든 비용은 선택한 통화를 사용하며 환율 변환하지 않습니다.
견적 금액에 운송비나 구성품이 이미 포함되어 있으면 다시 더하지 마세요. 관세는 금액으로 입력합니다.
마개당 도착 원가 = 견적 단가 + (운송비 + 금형비 + 기타 고정 비용) ÷ 주문 수량
Quoted closure / dispenser price: 0.2 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD; Customs / duty amount: 0 USD; Other fixed order charges: 0 USD → US$0.2250/closure입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out closure landed cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per closure in your selected currency/closure. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Quoted closure / dispenser price (currency/unit); Total material quote (currency); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency); Customs / duty amount (currency); Other fixed order charges (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per closure and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter quoted closure / dispenser price US$0.2000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per closure is US$0.2250/closure. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 마개 또는 디스펜서 견적 가격
- 0.2 USD/개
- 주문 수량
- 10,000 개
- 이 주문의 운송비
- 250 USD
- 이 주문에 배분된 금형 비용
- 0 USD
- 관세 금액
- 0 USD
- 기타 주문 고정 비용
- 0 USD
Landed/closure = Quoted price/unit + (Freight + Tooling + Other fixed charges) ÷ Order quantity자주 묻는 질문
Which units should I use for closure landed cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two closure landed cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units), freight for this order (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗