도구 42 / 136

Core Weight Calculator — US Units

Core Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have core outside diameter (inch), core inside diameter (inch), core width (inch) ready before you start.

사양 입력

lb/ft³

700kg/m³는 판지 밀도의 예시 추정값입니다. 보편적인 값이 아니므로 실제 지관 밀도를 입력하세요.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

지관 예상 중량

2.25 lb
지관 벽체 부피0.0516 ft³

기본 밀도는 판지의 예시 추정값이며 공통 규격이 아닙니다. 실제 밀도를 입력하거나 지관 실측 중량을 사용하세요.

균일한 중공 원통을 가정하며 마개와 끝단 부속품은 제외합니다.

Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)

Core outside diameter: 3.543307086614173 inch; Core inside diameter: 2.9921259842519685 inch; Core width: 31.496062992125985 inch; Core material density: 43.699572403301225 lb/ft³ → 2.25 lb

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)

The result answers a specific purchasing question: Work out core weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated core weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Core outside diameter (inch); Core inside diameter (inch); Core width (inch); Core material density (lb/ft³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated core weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter core outside diameter 3.54 inch, core inside diameter 2.99 inch, core width 31.50 inch, core material density 43.70 lb/ft³. The calculated estimated core weight is 2.25 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

지관 외경
3.54330709 inch
지관 내경
2.99212598 inch
지관 폭
31.496063 inch
지관 재료 밀도
43.6995724 lb/ft³
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)
지관 예상 중량2.25 lb

자주 묻는 질문

Which units should I use for core weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two core weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record core outside diameter (inch), core inside diameter (inch), core width (inch), core material density (lb/ft³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗