Corrugated Sheet Weight Calculator — US Units
Corrugated Sheet Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual board gsm (g/m²) ready before you start.
사양 입력
시트당 중량
실제 판지 평량을 사용하세요. 골 종류, ECT 및 BCT로 평량을 정할 수 없습니다.
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436
Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual board GSM: 500 g/m²; Sheet quantity: 1000 units → 1.06 lb/sheet입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out corrugated sheet weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read weight per sheet in lb/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Sheet width (inch); Sheet length (inch); Actual board GSM (g/m²); Sheet quantity (units). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review weight per sheet and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual board gsm 500.00 g/m², sheet quantity 1,000.00 units. The calculated weight per sheet is 1.06 lb/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 시트 폭
- 47.2440945 inch
- 시트 길이
- 31.496063 inch
- 실제 판지 평량
- 500 g/m²
- 시트 수량
- 1,000 개
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436자주 묻는 질문
Which units should I use for corrugated sheet weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two corrugated sheet weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual board gsm (g/m²), sheet quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗