TOOL 48 / 136

4-Ply Laminate GSM Calculator — US Units

4-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

4 films. 3 adhesive interfaces.

Load example

Typical density. Actual density varies by resin grade and formulation; use supplier or measured data when available. Measured or supplier GSM is generally more reliable than a density-derived estimate. For custom materials, enter a verified density. Do not use a generic density to estimate paper GSM.

FILM LAYER 01
16.68g/m²

Estimated using typical PET / BOPET density of 1.39 g/cm³.

FILM LAYER 02
24.30g/m²

Estimated using typical Aluminium foil density of 2.70 g/cm³.

FILM LAYER 03
17.10g/m²

Estimated using typical PA6 / Nylon density of 1.14 g/cm³.

FILM LAYER 04
55.20g/m²

Estimated using typical PE (generic) density of 0.9200 g/cm³.

Adhesive, print & coatings

Enter zero for an excluded addition. All GSM inputs are dry, retained mass per square meter. Adhesive, ink and coating thickness is not inferred from their GSM.

Adhesive interface 1

Dry retained coat weight

Adhesive interface 2

Dry retained coat weight

Adhesive interface 3

Dry retained coat weight

Ink

Dry retained mass

Coating

Dry retained mass

Other retained material

Dry retained mass

Total laminate GSM119.28g / m²
Film layers
113.28 g/m²
Adhesive, ink, coating & other
6.00 g/m²
Laminate yield
40.93 ft²/lb
Film thickness only
3.78 mil
Weight per 1,000 m²
262.97 lb
Mass contribution of every layer and addition
Layer / additionDry GSM
1. PET / BOPET16.68
2. Aluminium foil24.30
3. PA6 / Nylon17.10
4. PE (generic)55.20
Adhesive interface 12.00
Adhesive interface 22.00
Adhesive interface 32.00
Ink · excluded0.00
Coating · excluded0.00
Other retained material · excluded0.00
Total119.28

Film thickness excludes adhesive, ink and coating thickness. Yield is theoretical, before process waste. This estimate includes typical library densities.

Formula & substituted values

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²

Aluminium foil: 0.3543 mil × 25.4 × 2.70 = 24.30 g/m²

PA6 / Nylon: 0.5906 mil × 25.4 × 1.14 = 17.10 g/m²

PE (generic): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²

Total retained basis weight: 119.28 g/m²

Yield: 4,882.427636 ÷ 119.28 = 40.93 ft²/lb

The formula, made clear.

4-ply GSM = 25.4 × Σ(Four mil thicknesses × Their densities) + Dry retained additions

Build 4-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

How to use this calculator

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

A calculation you can check

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 4-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 3 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
93.76 g/m²
Coverage yield
52.08 ft²/lb
Material cost
US$0.03132/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Frequently asked questions

Which units should I use for 4-ply laminate gsm?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two 4-ply laminate gsm results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Check the displayed formula, units and assumptions before using the result.

Method, units and material assumptions ↗