TOOL 32 / 136

Film Thickness from GSM and Density Calculator — US Units

Film Thickness from GSM and Density connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), material density (g/cm³) ready before you start.

Your specifications

g/m²

Use actual supplier or measured GSM when available.

g/cm³

Typical density. Actual density varies by resin grade and formulation; use supplier or measured data when available.

Results update as you edit. Nothing is saved until you choose to.
Live calculation

Estimated film thickness

0.4724 mil
Thickness in mil0.4724 mil

Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.

A single density is appropriate only for a homogeneous material or a known effective density.

Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

Film GSM: 16.68 g/m²; Material density: 1.39 g/cm³ → 0.4724 mil

Calculated from your inputs. Confirm specifications with your supplier.

The formula, made clear.

Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

The result answers a specific purchasing question: Work out film thickness from gsm and density with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film thickness in mil. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

How to use this calculator

  1. 01

    Collect Film GSM (g/m²); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated film thickness and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

A calculation you can check

For this US purchasing example, enter film gsm 16.68 g/m², material density 1.39 g/cm³. The calculated estimated film thickness is 0.4724 mil. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Film GSM
16.68 g/m²
Material density
1.39 g/cm³
Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4
Estimated film thickness0.4724 mil

Frequently asked questions

Which units should I use for film thickness from gsm and density?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film thickness from gsm and density results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Check the displayed formula, units and assumptions before using the result.

Method, units and material assumptions ↗