Laminate Cost per ft² Calculator — US Units
Laminate Cost per ft² connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
Build the structure, layer by layer.
Typical density. Actual density varies by resin grade and formulation; use supplier or measured data when available. Measured or supplier GSM is generally more reliable than a density-derived estimate. For custom materials, enter a verified density. Do not use a generic density to estimate paper GSM.
Adhesive, print & coatings
Enter zero for an excluded addition. All GSM inputs are dry, retained mass per square meter. Adhesive prices refer to the supplied wet product; the solids percentage converts dry coat weight to wet consumption. Ink, coating and other prices are on a dry retained kilogram basis. Conversion losses, energy, labour and freight are excluded.
Dry retained coat weight
Dry retained mass
Dry retained mass
Dry retained mass
- Film layers
- 71.88 g/m²
- Adhesive, ink, coating & other
- 2.00 g/m²
- Total laminate GSM
- 73.88 g/m²
- Laminate yield
- 66.09 ft²/lb
- Film thickness only
- 2.83 mil
- Weight per 1,000 m²
- 162.88 lb
| Layer / addition | Dry GSM | USD/m² |
|---|---|---|
| 1. PET / BOPET | 16.68 | 0.05838 |
| 2. PE (generic) | 55.20 | 0.09936 |
| Adhesive interface 1 | 2.00 | 0.00800 |
| Ink · excluded | 0.00 | 0.00000 |
| Coating · excluded | 0.00 | 0.00000 |
| Other retained material · excluded | 0.00 | 0.00000 |
| Total | 73.88 | 0.1657 |
Film thickness excludes adhesive, ink and coating thickness. Yield is theoretical, before process waste. This estimate includes typical library densities.
Formula & substituted values
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²; US$1.5876/lb → US$0.00542/ft²
PE (generic): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²; US$0.8165/lb → US$0.00923/ft²
Total retained basis weight: 73.88 g/m²
Yield: 4,882.427636 ÷ 73.88 = 66.09 ft²/lb
Wet adhesive pounds = Dry pounds ÷ Solids fraction; every addition below is priced on its stated supplied basis.
Adhesive interface 1: US$0.00074/ft²
Total material cost: US$0.01540/ft²
The formula, made clear.
Build laminate cost per ft² from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
How to use this calculator
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
A calculation you can check
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 43.02 g/m²
- Coverage yield
- 113.49 ft²/lb
- Material cost
- US$0.01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
Frequently asked questions
Which units should I use for laminate cost per ft²?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two laminate cost per ft² results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Check the displayed formula, units and assumptions before using the result.
Method, units and material assumptions ↗