Connect FIBC cubic feet, fill pounds and bags per batch

Use internal dimensions, subtract stated headspace and multiply usable cubic feet by measured settled bulk density in lb/ft³. Use the approved planned fill for ordering bags.

Published by Nalyquo · ·

Illustrative calculations; no independent specialist review is claimed. This update adds publishing and methodology information.

Method and reference scopeEditorial policy and corrections

Set up the US purchasing comparison

Use internal dimensions, subtract stated headspace and multiply usable cubic feet by measured settled bulk density in lb/ft³. Use the approved planned fill for ordering bags.

Formula and worked US example

Volume(ft³) = L(in) × W(in) × H(in) ÷ 1,728; Bags = ceil(Batch lb ÷ Approved planned lb/bag)

A 36 × 36 × 48-inch envelope is 36 ft³. With 10% headspace, 32.4 ft³ remains. At an illustrative 40 lb/ft³, geometric fill is 1,296 lb before any lower approved limit. A 12,000-lb batch needs ten bags at a qualified planned 1,200 lb each.

Checks before using the estimate

Geometric fill is not a safe working load approval. Use the lower qualified planned payload and add spare bags explicitly.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Common questions

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Geometric fill is not a safe working load approval. Use the lower qualified planned payload and add spare bags explicitly.