Plan US footage and pounds for a good-pack order

Convert the accepted pack target into gross pack positions, then use repeat and lanes to obtain footage. Apply the purchased width and measured basis weight to get square feet and pounds.

Published by Nalyquo · ·

Illustrative calculations; no independent specialist review is claimed. This update adds publishing and methodology information.

Method and reference scopeEditorial policy and corrections

Set up the US purchasing comparison

Convert the accepted pack target into gross pack positions, then use repeat and lanes to obtain footage. Apply the purchased width and measured basis weight to get square feet and pounds.

Formula and worked US example

Gross positions = Good target ÷ Yield; Feet = Gross positions × Repeat(in) ÷ (12 × Lanes)

For 19,000 good packs, 5% loss, two lanes and a 12-inch repeat, plan 20,000 gross positions and 10,000 ft. At 30 inches wide and 0.010 lb/ft², the requirement is 25,000 ft² and 250 lb.

Checks before using the estimate

The repeat and full web width must belong to the same layout. Add separately supplied zippers, valves and labels independently.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Common questions

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

The repeat and full web width must belong to the same layout. Add separately supplied zippers, valves and labels independently.