Allow for lost pounds using the retained production fraction

Identify whether the loss rate is a share of gross input or an allowance added to net output. Use the same boundary for startup scrap, trim and rejected production.

Published by Nalyquo · ·

Illustrative calculations; no independent specialist review is claimed. This update adds publishing and methodology information.

Method and reference scopeEditorial policy and corrections

Set up the US purchasing comparison

Identify whether the loss rate is a share of gross input or an allowance added to net output. Use the same boundary for startup scrap, trim and rejected production.

Formula and worked US example

Gross lb = Net good-output lb ÷ (1 − Gross-input loss fraction)

To obtain 950 lb of accepted output with 5% gross-input loss, buy 950 ÷ 0.95 = 1,000 lb. Waste is 50 lb. Adding 5% to 950 gives only 997.5 lb and falls short by 2.5 lb.

Checks before using the estimate

Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Common questions

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.