Film mils, gauge and GSM: separate thickness from mass

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

Published by Nalyquo · ·

Illustrative calculations; no independent specialist review is claimed. This update adds publishing and methodology information.

Method and reference scopeEditorial policy and corrections

Set up the US purchasing comparison

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

Formula and worked US example

GSM = Thickness(mil) × 25.4 × Density(g/cm³)

A 2-mil layer at an illustrative 0.92 g/cm³ is 46.736 GSM. At the same 2 mil and 1.39 g/cm³, it is 70.612 GSM. Equal thickness therefore supplies different pounds over the same area.

Checks before using the estimate

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Common questions

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.