工具 109 / 136

Closure Cost per 1,000 Calculator — US Units

Closure Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted closure / dispenser price (currency/unit), order quantity (units), freight for this order (currency) ready before you start.

您的规格参数

USD/unit
件
USD
USD

仅为单位标识,不进行货币换算。

修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

每1,000个封盖成本

US$125.00/1,000 closures
封盖总成本US$0.1250/closures
每1,000件报价组件及附加费用US$100.00/1,000 units
每1,000件运费分摊US$25.00/1,000 units
每1,000件模具费分摊US$0.00000/1,000 units
含已输入分摊费用的订单总额US$1,250.00

仅在基础报价尚未包含时,才单独输入印刷、装饰、后加工或组件费用。

模具费指分摊到本订单的金额;若模具用于多个订单,请按使用寿命摊销。

每千个封口件成本 = 1,000 ×(封口件单价 + 单位分摊费用)

Quoted closure / dispenser price: 0.1 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD → US$125.00/1,000 closures

根据您输入的数据计算。请与供应商确认规格。

公式解释。

每千个封口件成本 = 1,000 ×(封口件单价 + 单位分摊费用)

The result answers a specific purchasing question: Work out closure cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 closures in your selected currency/1,000 closures. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Quoted closure / dispenser price (currency/unit); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per 1,000 closures and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter quoted closure / dispenser price US$0.1000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per 1,000 closures is US$125.00/1,000 closures. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

封盖或分配器报价
0.1 USD/件
订单数量
10,000 件
本订单运费
250 USD
本订单分摊模具费用
0 USD
Cost/1,000 closures = 1,000 × (Closure price + Allocated charges/unit)
每1,000个封盖成本US$125.00/1,000 closures

常见问题

Which units should I use for closure cost per 1,000?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two closure cost per 1,000 results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted closure / dispenser price (currency/unit), order quantity (units), freight for this order (currency), tooling allocated to this order (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗