工具 131 / 136

Closure Order with Rejection Allowance Calculator — US Units

Closure Order with Rejection Allowance connects the figures on a US supplier quote with the quantity used by your packaging operation. Have good closures required (units), expected closure rejection (%), closures per supplier carton (units) ready before you start.

您的规格参数

件
%
件
修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

需采购封盖数量

52,000.00 件
整箱数量26.00 箱
预计可用余量1,480.00 件

每件成品需要一个封盖。

报废率适用于全部采购封盖,不含补货。

不含独立最低起订量或生产开机余量。

箱数 = ceil(合格目标数 ÷ (1 − 不合格率/100) ÷ 每箱数量)

Good closures required: 50000 units; Expected closure rejection: 1 %; Closures per supplier carton: 2000 units → 52,000.00 件

根据您输入的数据计算。请与供应商确认规格。

公式解释。

箱数 = ceil(合格目标数 ÷ (1 − 不合格率/100) ÷ 每箱数量)

The result answers a specific purchasing question: Work out closure order with rejection allowance with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read closures to purchase in units. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Good closures required (units); Expected closure rejection (%); Closures per supplier carton (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review closures to purchase and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter good closures required 50,000.00 units, expected closure rejection 1.00 %, closures per supplier carton 2,000.00 units. The calculated closures to purchase is 52,000.00 units. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

所需合格封盖数量
50,000 件
预计封盖报废率
1 %
每箱供应商包装的封盖数量
2,000 件
Cartons = ceil(Good target ÷ (1 − Rejection/100) ÷ Carton quantity)
需采购封盖数量52,000.00 件

常见问题

Which units should I use for closure order with rejection allowance?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two closure order with rejection allowance results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record good closures required (units), expected closure rejection (%), closures per supplier carton (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗