工具 32 / 136

Film Thickness from GSM and Density Calculator — US Units

Film Thickness from GSM and Density connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), material density (g/cm³) ready before you start.

您的规格参数

g/m²

如有供应商提供的实际克重或实测克重,请优先使用。

g/cm³

典型密度。实际密度随树脂牌号和配方而变化;如有供应商数据或实测数据,请优先使用。

修改参数时结果会自动更新。仅在您选择保存时才会保存。
实时计算

估算薄膜厚度

0.4724 mil
厚度(mil)0.4724 mil

Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.

单一密度仅适用于均质材料或已知有效密度的情况。

Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

Film GSM: 16.68 g/m²; Material density: 1.39 g/cm³ → 0.4724 mil

根据您输入的数据计算。请与供应商确认规格。

公式解释。

Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

The result answers a specific purchasing question: Work out film thickness from gsm and density with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film thickness in mil. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

如何使用此计算器

  1. 01

    Collect Film GSM (g/m²); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated film thickness and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

可以核验的计算

For this US purchasing example, enter film gsm 16.68 g/m², material density 1.39 g/cm³. The calculated estimated film thickness is 0.4724 mil. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

薄膜克重
16.68 g/m²
材料密度
1.39 g/cm³
Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4
估算薄膜厚度0.4724 mil

常见问题

Which units should I use for film thickness from gsm and density?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film thickness from gsm and density results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

使用结果前,请核对显示的公式、单位和假设。

方法、单位和材料假设 ↗