Check carton yield on inch-based sheet layouts

Compare both uniform orientations using usable sheet dimensions. Deduct known margins first, then verify grain, registration and die constraints with the converter.

发布者 Nalyquo · ·

示例计算;不宣称经过独立专家审核。本次更新增加发布和方法信息。

方法和参考范围编辑政策与更正

Set up the US purchasing comparison

Compare both uniform orientations using usable sheet dimensions. Deduct known margins first, then verify grain, registration and die constraints with the converter.

Formula and worked US example

Uniform yield = max(floor(W/w) × floor(L/l), floor(W/l) × floor(L/w))

A 12 × 10-inch blank on a usable 40 × 30-inch sheet fits 3 × 3 = 9 in one orientation. Rotating all blanks gives 4 × 2 = 8. Nine is the better uniform rectangular estimate.

Checks before using the estimate

Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

常见问题

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.