Convert film dollars per pound, square foot and linear foot

Measured net pounds per square foot connect weight pricing to coverage. Divide purchased width in inches by 12 before using it with running length in feet.

发布者 Nalyquo · ·

示例计算;不宣称经过独立专家审核。本次更新增加发布和方法信息。

方法和参考范围编辑政策与更正

Set up the US purchasing comparison

Measured net pounds per square foot connect weight pricing to coverage. Divide purchased width in inches by 12 before using it with running length in feet.

Formula and worked US example

$/ft² = $/lb × lb/ft²; $/linear ft = $/ft² × Width(in) ÷ 12

A 30-inch web is 2.5 ft wide. At 0.010 lb/ft² and $1.50/lb, material is $0.015/ft² and $0.0375/linear ft. A 10,000-ft roll contains 25,000 ft² and 250 lb. Every pricing basis gives the same $375 subtotal.

Checks before using the estimate

Subtract core and wrapping tare before measuring film basis weight. If the supplier reports GSM, multiply by 0.0002048161436 to obtain lb/ft².

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

常见问题

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Subtract core and wrapping tare before measuring film basis weight. If the supplier reports GSM, multiply by 0.0002048161436 to obtain lb/ft².