Film mils, gauge and GSM: separate thickness from mass

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

发布者 Nalyquo · ·

示例计算;不宣称经过独立专家审核。本次更新增加发布和方法信息。

方法和参考范围编辑政策与更正

Set up the US purchasing comparison

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

Formula and worked US example

GSM = Thickness(mil) × 25.4 × Density(g/cm³)

A 2-mil layer at an illustrative 0.92 g/cm³ is 46.736 GSM. At the same 2 mil and 1.39 g/cm³, it is 70.612 GSM. Equal thickness therefore supplies different pounds over the same area.

Checks before using the estimate

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

常见问题

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.