Check roll pounds and footage after removing tare

Subtract independently confirmed core and wrapping pounds from gross roll mass. Use the resulting net film pounds with measured area and the purchased web width.

发布者 Nalyquo · ·

示例计算;不宣称经过独立专家审核。本次更新增加发布和方法信息。

方法和参考范围编辑政策与更正

Set up the US purchasing comparison

Subtract independently confirmed core and wrapping pounds from gross roll mass. Use the resulting net film pounds with measured area and the purchased web width.

Formula and worked US example

Length(ft) = Net lb ÷ (Width(in) ÷ 12 × Basis weight(lb/ft²))

A 275-lb gross roll with 25 lb of tare contains 250 lb of film. At 30 inches wide and 0.010 lb/ft², that is 25,000 ft² and 10,000 ft. A $375 roll quote equals $1.50/lb and $0.0375/ft.

Checks before using the estimate

Core outside diameter is different from bore diameter. Diameter-based footage also depends on actual winding thickness and tightness.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

常见问题

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Core outside diameter is different from bore diameter. Diameter-based footage also depends on actual winding thickness and tightness.