ツール 77 / 136

Cartons per Sheet Calculator — US Units

Cartons per Sheet connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual blank width (inch) ready before you start.

仕様を入力

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

最適な単純長方形配置

4.00 blanks/sheet
ブランクを回転しない配置4.00 blanks/sheet
ブランクを90°回転3.00 blanks/sheet
長方形面積利用率83.33 %

均一な長方形配置を2方向のみ比較します。溝間隔、くわえ代、紙目制約、不規則な抜き型のネスティングは含みません。

シートあたり紙器数 = 切り捨て(シート幅 ÷ ブランク幅)× 切り捨て(シート長 ÷ ブランク長)

Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch → 4.00 blanks/sheet

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

シートあたり紙器数 = 切り捨て(シート幅 ÷ ブランク幅)× 切り捨て(シート長 ÷ ブランク長)

The result answers a specific purchasing question: Work out cartons per sheet with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read best simple rectangular layout in blanks/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Sheet width (inch); Sheet length (inch); Actual blank width (inch); Actual blank length (inch). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review best simple rectangular layout and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual blank width 19.69 inch, actual blank length 15.75 inch. The calculated best simple rectangular layout is 4.00 blanks/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

シート幅
47.2440945 inch
シート長さ
31.496063 inch
実際のブランク幅
19.6850394 inch
実際のブランク長さ
15.7480315 inch
Cartons/sheet = floor(Sheet width ÷ Blank width) × floor(Sheet length ÷ Blank length)
最適な単純長方形配置4.00 blanks/sheet

よくある質問

Which units should I use for cartons per sheet?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two cartons per sheet results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual blank width (inch), actual blank length (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗