ツール 76 / 136

Folding Carton Weight Calculator — US Units

Folding Carton Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²) ready before you start.

仕様を入力

g/m²
%
入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

推定カートン板紙重量

0.1323 lb/carton
実際の長方形ブランク面積2.15 ft²
抜き加工前のブランク質量0.1323 lb
指定の抜き加工で除去する材料0.00 lb

実際のブランク寸法を使用します。完成包装の内寸や外寸から正確な抜き型展開寸法は確定できません。

抜き取り率はこのブランクから除去する材料の割合であり、生産歩留まりの損失ではありません。接着剤、インク、付属品は実測坪量に含む場合を除き対象外です。

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual paperboard GSM: 300 g/m²; Blank area removed by cutouts: 0 % → 0.1323 lb/carton

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

The result answers a specific purchasing question: Work out folding carton weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated carton board weight in lb/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual paperboard GSM (g/m²); Blank area removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated carton board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual paperboard gsm 300.00 g/m², blank area removed by cutouts 0.00 %. The calculated estimated carton board weight is 0.1323 lb/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

実際のブランク幅
19.6850394 inch
実際のブランク長さ
15.7480315 inch
実際の板紙坪量
300 g/m²
打ち抜きで除くブランク面積
0 %
Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)
推定カートン板紙重量0.1323 lb/carton

よくある質問

Which units should I use for folding carton weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two folding carton weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²), blank area removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗