도구 70 / 136

Corrugated Box Material Cost Calculator — US Units

Corrugated Box Material Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.

사양 입력

g/m²
USD/lb
USD/unit

단위 표시만 하며 통화 변환은 하지 않습니다.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

블랭크당 판지 재료 원가

US$0.08000/blank
상자 1,000개당 판지 재료 원가US$80.00/1,000 boxes
입력한 가공비 포함 원가US$0.08000/box
가공비 포함 1,000개당US$80.00/1,000 boxes

실제 블랭크 치수를 사용합니다. 완성 포장의 내부 또는 외부 치수만으로 정확한 칼선 블랭크를 정할 수 없습니다.

추가 가공 필드에 명시적으로 입력하지 않으면 인쇄, 절단 및 접착은 제외됩니다. 공정 손실은 포함되지 않습니다.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Board price on selected basis: 0.36287389600000003 USD/lb; Converting / printing / gluing per box: 0 USD/unit → US$0.08000/blank

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

The result answers a specific purchasing question: Work out corrugated box material cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read board material cost per blank in your selected currency/blank. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Board price on selected basis (currency/lb); Converting / printing / gluing per box (currency/unit). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review board material cost per blank and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², board price on selected basis US$0.3629/lb. The calculated board material cost per blank is US$0.08000/blank. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

실제 전개도 폭
19.6850394 inch
실제 전개도 길이
15.7480315 inch
실제 판지 평량
500 g/m²
선택 기준 판지 가격
0.362873896 USD/lb
상자당 가공 / 인쇄 / 접착
0 USD/단위
Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb
블랭크당 판지 재료 원가US$0.08000/blank

자주 묻는 질문

Which units should I use for corrugated box material cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated box material cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), board price on selected basis (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗