Delivered Film Cost Calculator — US Units
Delivered Film Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted material quantity (lb), material price on selected basis (currency/lb), freight (currency) ready before you start.
Your specifications
Label only. No exchange-rate conversion.
Needed for conversion between kg and m².
Total landed cost
All amounts use the selected currency; no exchange conversion.
Duty is an entered monetary amount, not an automatically calculated tax rate.
Landed cost = Quoted quantity × Unit price + Freight + Surcharge + Duty + Other charges
Quoted material quantity: 2204.6226218487755 lb; Material price on selected basis: 1.3607771100000001 USD/lb; Freight: 250 USD; Surcharges: 50 USD; Customs / duty amount: 0 USD; Other fixed charges: 0 USD; Film GSM: 80 g/m² → US$3,300.00Calculated from your inputs. Confirm specifications with your supplier.
The formula, made clear.
The result answers a specific purchasing question: Work out delivered film cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read total landed cost in your selected currency. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
How to use this calculator
- 01
Collect Quoted material quantity (lb); Material price on selected basis (currency/lb); Freight (currency); Surcharges (currency); Customs / duty amount (currency); Other fixed charges (currency); Film GSM (g/m²); Net film weight per roll (lb). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review total landed cost and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
A calculation you can check
For this US purchasing example, enter quoted material quantity 2,204.62 lb, material price on selected basis US$1.3608/lb, freight US$250.00, surcharges US$50.00. The calculated total landed cost is US$3,300.00. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Quoted material quantity
- 2,204.62262 lb
- Material price on selected basis
- 1.36077711 USD/lb
- Freight
- 250 USD
- Surcharges
- 50 USD
- Customs / duty amount
- 0 USD
- Other fixed charges
- 0 USD
- Film GSM
- 80 g/m²
Landed cost = Quoted quantity × Unit price + Freight + Surcharge + Duty + Other chargesFrequently asked questions
Which units should I use for delivered film cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two delivered film cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted material quantity (lb), material price on selected basis (currency/lb), freight (currency), surcharges (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Check the displayed formula, units and assumptions before using the result.
Method, units and material assumptions ↗