TOOL 96 / 136

Thermoformed Tray Cost per 1,000 Calculator — US Units

Thermoformed Tray Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%) ready before you start.

Your specifications

USD/lb
%
USD/unit
units
USD

Unit label only. No currency conversion.

Results update as you edit. Nothing is saved until you choose to.
Live calculation

Cost per 1,000 trays

US$76.58/1,000 trays
Cost per traysUS$0.07658/trays
Gross resin cost per 1,000US$31.58/1,000 trays
Gross resin per 1,000 good trays46.41 lb/1,000 trays
Freight allocation per 1,000US$25.00/1,000 trays

Waste is a fraction of gross input lost. Gross requirement = good output ÷ (1 − waste/100).

Scrap credit or internal regrind offsets are not automatically deducted. Conversion cost is included only as entered.

Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb

Actual finished tray weight: 0.044092452436975516 lb; Resin price per kg: 0.6803885550000001 USD/lb; Process loss on gross input: 5 %; Conversion cost per good tray: 0.02 USD/unit; Good trays in shipment: 10000 units; Freight for this order: 250 USD → US$76.58/1,000 trays

Calculated from your inputs. Confirm specifications with your supplier.

The formula, made clear.

Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb

The result answers a specific purchasing question: Work out thermoformed tray cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 trays in your selected currency/1,000 trays. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

How to use this calculator

  1. 01

    Collect Actual finished tray weight (lb); Resin price per lb (currency/lb); Process loss on gross input (%); Conversion cost per good tray (currency/unit); Good trays in shipment (units); Freight for this order (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per 1,000 trays and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

A calculation you can check

For this US purchasing example, enter actual finished tray weight 0.0441 lb, resin price per lb US$0.6804/lb, process loss on gross input 5.00 %, conversion cost per good tray US$0.02000/unit. The calculated cost per 1,000 trays is US$76.58/1,000 trays. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Actual finished tray weight
0.0440924524 lb
Resin price per lb
0.680388555 USD/lb
Process loss on gross input
5 %
Conversion cost per good tray
0.02 USD/unit
Good trays in shipment
10,000 units
Freight for this order
250 USD
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb
Cost per 1,000 traysUS$76.58/1,000 trays

Frequently asked questions

Which units should I use for thermoformed tray cost per 1,000?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two thermoformed tray cost per 1,000 results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%), conversion cost per good tray (currency/unit) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Check the displayed formula, units and assumptions before using the result.

Method, units and material assumptions ↗